2010 Lincoln Navigator tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2010 Lincoln Navigator.

2010 Lincoln Navigator tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2007 – 2014 1 trim

310 hp · V8 255/70 R18 112H 3 fitments

GenerationIII 2007–2014

Power310 hp

EngineV8, Petrol

Center bore87.1 mm

PCD6x135

ThreadM14 x 2.0

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
255/70 R18 112H	18x8.5 ET44 ~~6x135~~	35	Tires Rims
275/55 R20 111H	20x8.5 ET44 ~~6x135~~	35	Tires Rims
285/45 R22 114H	22x9.5 ET44 ~~6x135~~	35	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.