Skip to content

2022 Lynk&Co 06 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2022 Lynk&Co 06.

2022 Lynk&Co 06 tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2022

Open a trim for its factory package and every alternative size, front and rear.

Lynk&Co 06 06

2020 – 2024 2 trims

06 1.5 T

173 hp · 1.5 L JLH-3G15TD I3 Petrol 1.5 L JLH-3G15TD I3 215/55 R18 3 fitments
Generation06 2020–2024
MarketChina
Power173 hp
Engine1.5 L JLH-3G15TD I3 Petrol 1.5 L JLH-3G15TD I3, Petrol
Center bore54.1 mm
PCD5x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE215/55 R1818x7 ET50 5x114.3TiresRims
OE225/45 R1919x7.5 ET50 5x114.3TiresRims
Alt215/60 R1717x6.5 ET45 5x114.3TiresRims

06 1.5 TD

184 hp · 1.5 L JLH-3G15TD I3 Petrol 1.5 L JLH-3G15TD I3 225/45 R19 3 fitments
Generation06 2020–2024
MarketChina
Power184 hp
Engine1.5 L JLH-3G15TD I3 Petrol 1.5 L JLH-3G15TD I3, Petrol
Center bore54.1 mm
PCD5x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/45 R1919x7.5 ET50 5x114.3TiresRims
Alt215/60 R1717x6.5 ET45 5x114.3TiresRims
Alt215/55 R1818x7 ET50 5x114.3TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.