Skip to content

2020 Mahindra KUV100 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2020 Mahindra KUV100.

2020 Mahindra KUV100 tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2020

Open a trim for its factory package and every alternative size, front and rear.

Mahindra KUV100 Facelift

2018 – 2027 3 trims

KUV100 1.2 D

77 hp · 1.2L D75 I3 185/65 R14 86H 2 fitments
GenerationFacelift 2018–2027
MarketSoutheast Asia
Power77 hp
Engine1.2L D75 I3, Diesel
Center bore60.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 R14 86H14x5.5 4x10032TiresRims
185/60 R15 84H15x5.5 4x10032TiresRims

KUV100 1.2 MPFi

82 hp · 1.2L G80 I3 185/65 R14 86H 2 fitments
GenerationFacelift 2018–2027
MarketSoutheast Asia
Power82 hp
Engine1.2L G80 I3, Petrol
Center bore60.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 R14 86H14x5.5 5.5J 4x10032TiresRims
185/60 R15 84H15x5.5 5.5J 4x10032TiresRims

KUV100 1.2i

86 hp · 1.2L I3 185/60 R15 84H 1 fitment
GenerationFacelift 2018–2027
MarketEurope
Power86 hp
Engine1.2L I3, Petrol
Center bore60.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/60 R15 84H15x5.5 4x10032TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.