2007 Mahindra Pik Up tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2007 Mahindra Pik Up.

2007 Mahindra Pik Up tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2007 – 2009 1 trim

106 hp · I4 245/75 R16 111S 3 fitments

GenerationI 2007–2009

Power106 hp

EngineI4, Diesel

Center bore108.1 mm

PCD5x160

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/75 R16 111S	16x6.5 ET40 ~~5x160~~	–	Tires Rims
245/70 R17 110T	17x6.5 ET40 ~~5x160~~	–	Tires Rims
265/65 R17 112T	17x7 ET35 ~~5x160~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.