Skip to content

2026 Mahindra Scorpio-N tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2026 Mahindra Scorpio-N.

2026 Mahindra Scorpio-N tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2026

Open a trim for its factory package and every alternative size, front and rear.

Mahindra Scorpio-N Z101

2022 – 2027 2 trims

Scorpio-N 2.0 TGDi (SUV, 5d)

200 hp · 2.0 L I4 Petrol 2.0 L I4 245/65 R17 / 245/65 R17 2 fitments
GenerationZ101 2022–2027
MarketSoutheast Asia
Power200 hp
Engine2.0 L I4 Petrol 2.0 L I4, Petrol
Center bore70.2 mm
PCD5x139.7
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront245/65 R1717x 5x139.7–TiresRims
Rear245/65 R17 5x139.7–Tires
OEFront255/60 R1818x 5x139.7–TiresRims
Rear255/60 R18 5x139.7–Tires

Scorpio-N 2.2 CRDi (SUV, 5d)

130 hp · 2.2 L I4 Diesel 2.2 L I4 245/65 R17 / 245/65 R17 2 fitments
GenerationZ101 2022–2027
MarketSoutheast Asia
Power130 hp
Engine2.2 L I4 Diesel 2.2 L I4, Diesel
Center bore70.2 mm
PCD5x139.7
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront245/65 R1717x 5x139.7–TiresRims
Rear245/65 R17 5x139.7–Tires
OEFront255/60 R1818x 5x139.7–TiresRims
Rear255/60 R18 5x139.7–Tires
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.