2011 Mahindra Thar tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 Mahindra Thar.

2011 Mahindra Thar tire sizes

185/85R16 235/70R16

Bolt patterns

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2010 – 2020 3 trims

106 hp · NEF I4 235/70 R16 1 fitment

GenerationI 2010–2020

Power106 hp

EngineNEF I4, Diesel

Center boreN/A

PCD5x160

ThreadN/A

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/70 R16	16x6.5 ET36 ~~5x160~~	35	Tires Rims

62 hp · M2DICR I4 185/85 R16 105Q 1 fitment

GenerationI 2010–2020

Power62 hp

EngineM2DICR I4, Diesel

Center boreN/A

PCD5x139.7

ThreadN/A

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/85 R16 105Q	16x4.5 ~~5x139.7~~	–	Tires Rims

62 hp · M2DICR I4 6.00x R16 1 fitment

GenerationI 2010–2020

Power62 hp

EngineM2DICR I4, Diesel

Center boreN/A

PCD5x160

ThreadN/A

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
6.00x R16	16x6.5 ET36 ~~5x160~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.