Skip to content

2019 Maruti Baleno tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2019 Maruti Baleno.

2019 Maruti Baleno tire sizes

Bolt pattern
Fitment tables

5 trims sold in 2019

Open a trim for its factory package and every alternative size, front and rear.

Maruti Baleno II Facelift

2019 – 2021 5 trims

Baleno 1.0 Boosterjet

101 hp · I3 195/55 R16 87V 1 fitment
GenerationII Facelift 2019–2021
Power101 hp
EngineI3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
195/55 R16 87V16x6 ET38 4x100–TiresRims

Baleno 1.2 Dual Jet

89 hp · 1.2L I4 185/65 R15 88H 2 fitments
GenerationII Facelift 2019–2021
Power89 hp
Engine1.2L I4, Hybrid
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 R15 88H15x5.5 ET38 4x100–TiresRims
195/55 R16 87V16x6 ET38 4x100–TiresRims

Baleno 1.2 VVT

82 hp · I4 185/65 R15 88H 2 fitments
GenerationII Facelift 2019–2021
Power82 hp
EngineI4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 R15 88H15x5.5 ET38 4x100–TiresRims
195/55 R16 87V16x6 ET38 4x100–TiresRims

Baleno 1.2L VVT

82 hp · 1.2L I4 185/65 R15 88H 2 fitments
GenerationII Facelift 2019–2021
Power82 hp
Engine1.2L I4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 R15 88H15x5.5 ET38 4x100–TiresRims
195/55 R16 87V16x6 ET38 4x100–TiresRims

Baleno 1.3 DDiS

74 hp · I4 185/65 R15 88H 2 fitments
GenerationII Facelift 2019–2021
Power74 hp
EngineI4, Diesel
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 R15 88H15x5.5 ET38 4x100–TiresRims
195/55 R16 87V16x6 ET38 4x100–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.