Skip to content

2002 Maruti Versa tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2002 Maruti Versa.

2002 Maruti Versa tire sizes

Bolt pattern
Fitment tables

1 trim sold in 2002

Open a trim for its factory package and every alternative size, front and rear.

Maruti Versa Versa

2001 – 2009 1 trim

Versa 1.3

82 hp · I4 165/65 R14 1 fitment
GenerationVersa 2001–2009
Power82 hp
EngineI4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
165/65 R1414x4.5 ET35 4x100TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.