2014 Maruti Wagon R tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2014 Maruti Wagon R.

2014 Maruti Wagon R tire sizes

145/80R13 155/65R14

Bolt pattern

4x100

2 generations were sold in 2014. Check your chassis code before ordering wheels.

Other years

2010 2011 2012 2013 2014 2015 2016 2017 All 1999–2026

Fitment tables

3 trims sold in 2014

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Maruti Wagon R II Facelift

2014 – 2018 2 trims

Wagon R 1.0i

67 hp · 1.0L K10B I3 145/80 R13 75T 2 fitments

GenerationII Facelift 2014–2018

Power67 hp

Engine1.0L K10B I3, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
145/80 R13 75T	13x4 ET45 ~~4x100~~	–	Tires Rims
155/65 R14 75T	14x4.5 ET45 ~~4x100~~	–	Tires Rims

Wagon R 1.0i CNG

58 hp · 1.0L K10B I3 Natural 145/80 R13 75T 2 fitments

GenerationII Facelift 2014–2018

Power58 hp

Engine1.0L K10B I3 Natural, Gas

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
145/80 R13 75T	13x4 ET45 ~~4x100~~	–	Tires Rims
155/65 R14 75T	14x4.5 ET45 ~~4x100~~	–	Tires Rims

Maruti Wagon R II

2010 – 2014 1 trim

Wagon R 1.0i

67 hp · I3 145/80 R13 75T 1 fitment

GenerationII 2010–2014

Power67 hp

EngineI3, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
145/80 R13 75T	13x4 ET45 ~~4x100~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.