2001 Maserati 3200 GT tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2001 Maserati 3200 GT.

2001 Maserati 3200 GT tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1998 – 2002 Europe market 1 trim

365 hp · V8 235/40 ZR18 96Y / 265/35 ZR18 97W 2 fitments

Generationl 1998–2002

Power365 hp

EngineV8, Petrol

Center bore67.1 mm

PCD5x108

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front235/40 ZR18 96Y	18x8 ET55 ~~5x108~~	29	Tires Rims
Rear265/35 ZR18 97W	18x9.5 ET52 ~~5x108~~	30	Tires Rims
Front245/35 ZR19 95Y	19x8.5 ET52 ~~5x108~~	29	Tires Rims
Rear275/30 ZR19 96W	19x10 ET45 ~~5x108~~	30	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.