Skip to content

2026 Maserati GT2 Stradale tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2026 Maserati GT2 Stradale.

2026 Maserati GT2 Stradale tire sizes

Fitment tables

2 trims sold in 2026

Open a trim for its factory package and every alternative size, front and rear.

Maserati GT2 Stradale GT2 Stradale

2024 – 2027 2 trims

GT2 Stradale 3.0T

631 hp · 3.0 L V6 Petrol 3.0 L V6 245/35 ZR20 / 305/30 ZR20 2 fitments
GenerationGT2 Stradale 2024–2027
MarketUSA
Power631 hp
Engine3.0 L V6 Petrol 3.0 L V6, Petrol
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront245/35 ZR2020x9 ET50 32TiresRims
Rear305/30 ZR2020x11 ET63 32TiresRims
AltFront245/30 ZR2121x9 ET50 33TiresRims
Rear305/25 ZR2121x11 ET50 33TiresRims

GT2 Stradale 3.0T 7BA-MC30

631 hp · 3.0 L V6 Petrol 3.0 L V6 245/35 ZR20 / 305/30 ZR20 2 fitments
GenerationGT2 Stradale 2024–2027
MarketJapan
Power631 hp
Engine3.0 L V6 Petrol 3.0 L V6, Petrol
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront245/35 ZR2020x9 ET50 32TiresRims
Rear305/30 ZR2020x11 ET63 32TiresRims
AltFront245/30 ZR2121x9 ET50 33TiresRims
Rear305/25 ZR2121x11 ET50 33TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.