Skip to content

2023 Maserati MC20 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2023 Maserati MC20.

2023 Maserati MC20 tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2023

Open a trim for its factory package and every alternative size, front and rear.

Maserati MC20 MC20

2020 – 2025 2 trims

MC20 3.0T

621 hp · 3.0 L V6 Petrol 3.0 L V6 245/35 ZR20 / 305/30 ZR20 2 fitments
GenerationMC20 2020–2025
MarketUSA
Power621 hp
Engine3.0 L V6 Petrol 3.0 L V6, Petrol
Center bore65.1 mm
PCD5x110
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront245/35 ZR2020x9 ET50 5x11032TiresRims
Rear305/30 ZR2020x11 ET63 5x11032TiresRims
AltFront245/30 ZR2121x9 ET50 5x110–TiresRims
Rear305/25 ZR2121x11 ET50 5x110–TiresRims

MC20 3.0T 7BA-MC30

621 hp · 3.0 L V6 Petrol 3.0 L V6 245/35 ZR20 / 305/30 ZR20 2 fitments
GenerationMC20 2020–2025
MarketJapan
Power621 hp
Engine3.0 L V6 Petrol 3.0 L V6, Petrol
Center bore65.1 mm
PCD5x110
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront245/35 ZR2020x9 ET50 5x11032TiresRims
Rear305/30 ZR2020x11 ET63 5x11032TiresRims
AltFront245/30 ZR2121x9 ET50 5x110–TiresRims
Rear305/25 ZR2121x11 ET50 5x110–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.