1999 Maserati Quattroporte tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1999 Maserati Quattroporte.

1999 Maserati Quattroporte tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1994 – 2001 3 trims

283 hp · 2.0L AM573 V6 205/55 ZR16 / 225/50 ZR16 3 fitments

GenerationIV (AM337) 1994–2001

Power283 hp

Engine2.0L AM573 V6, Petrol

Center bore67.1 mm

PCD5x108

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front205/55 ZR16	16x7 ET30 ~~5x108~~	–	Tires Rims
Rear225/50 ZR16	16x8 ET56 ~~5x108~~	–	Tires Rims
Front205/50 ZR17	17x7 ET30 ~~5x108~~	–	Tires Rims
Rear225/45 ZR17	17x8 ET55 ~~5x108~~	–	Tires Rims
Front225/45 ZR17	17x8 ET34 ~~5x108~~	–	Tires Rims
Rear245/40 ZR17	17x9 ET53.5 ~~5x108~~	–	Tires Rims

276 hp · 2.8L AM574 V6 205/55 ZR16 / 225/50 ZR16 3 fitments

GenerationIV (AM337) 1994–2001

Power276 hp

Engine2.8L AM574 V6, Petrol

Center bore67.1 mm

PCD5x108

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front205/55 ZR16	16x7 ET30 ~~5x108~~	–	Tires Rims
Rear225/50 ZR16	16x8 ET56 ~~5x108~~	–	Tires Rims
Front205/50 ZR17	17x7 ET30 ~~5x108~~	–	Tires Rims
Rear225/45 ZR17	17x8 ET55 ~~5x108~~	–	Tires Rims
Front225/45 ZR17	17x8 ET34 ~~5x108~~	–	Tires Rims
Rear245/40 ZR17	17x9 ET53.5 ~~5x108~~	–	Tires Rims

331 hp · 3.2L V8 225/45 ZR17 2 fitments

GenerationIV (AM337) 1994–2001

Power331 hp

Engine3.2L V8, Petrol

Center bore67.1 mm

PCD5x108

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/45 ZR17	17x9 ET53.5 ~~5x108~~	–	Tires Rims
225/40 ZR18	18x9 ET50 ~~5x108~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.