Skip to content

2012 Maserati Quattroporte tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2012 Maserati Quattroporte.

Fitment tables

3 trims sold in 2012

Open a trim for its factory package and every alternative size, front and rear.

Maserati Quattroporte V (M139) Facelift

2009 – 2012 3 trims

Quattroporte 4.2i

394 hp · 4.2L F136 S/U V8 245/45 ZR18 96Y / 285/40 ZR18 101Y 3 fitments
GenerationV (M139) Facelift 2009–2012
Power394 hp
Engine4.2L F136 S/U V8, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front245/45 ZR18 96Y18x8.5 ET52 5x114.332TiresRims
Rear285/40 ZR18 101Y18x10.5 ET50.5 5x114.335TiresRims
Front245/40 ZR19 94Y19x8.5 ET52 5x114.332TiresRims
Rear285/35 ZR19 99Y19x10.5 ET50 5x114.335TiresRims
Front245/35 ZR20 95Y20x8.5 ET52 5x114.333TiresRims
Rear285/30 ZR20 97Y20x10.5 ET50 5x114.336TiresRims

Quattroporte 4.7i

434 hp · 4.7L F136 Y V8 245/40 ZR19 96Y / 285/35 ZR19 101Y 3 fitments
GenerationV (M139) Facelift 2009–2012
Power434 hp
Engine4.7L F136 Y V8, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front245/40 ZR19 96Y19x8.5 ET52 5x114.332TiresRims
Rear285/35 ZR19 101Y19x10.5 ET50.5 5x114.335TiresRims
Front245/35 ZR20 94Y20x8.5 ET52 5x114.332TiresRims
Rear285/30 ZR20 99Y20x10.5 ET50.5 5x114.335TiresRims
Front255/30 ZR21 94Y21x9 ET50 5x114.333TiresRims
Rear305/25 ZR21 99Y21x11 ET50 5x114.336TiresRims

Quattroporte 4.7i

424 hp · 4.7L F136 Y V8 245/40 ZR19 96Y 3 fitments
GenerationV (M139) Facelift 2009–2012
Power424 hp
Engine4.7L F136 Y V8, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/40 ZR19 96Y19x10.5 ET50.5 5x114.32.4TiresRims
245/35 ZR20 94Y20x10.5 ET50.5 5x114.32.4TiresRims
245/30 ZR21 94Y21x10.5 ET50 5x114.32.5TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.