Skip to content

2022 Maxus D60 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2022 Maxus D60.

2022 Maxus D60 tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2022

Open a trim for its factory package and every alternative size, front and rear.

Maxus D60 D60

2019 – 2024 2 trims

D60 1.3T

161 hp · 1.35 L LIY I3 Petrol 1.35 L LIY I3 215/65 R17 3 fitments
GenerationD60 2019–2024
MarketChina
Power161 hp
Engine1.35 L LIY I3 Petrol 1.35 L LIY I3, Petrol
Center bore61.4 mm
PCD5x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE215/65 R1717x6.5 5x114.330TiresRims
Alt235/55 R1818x7 5x114.330TiresRims
Alt235/50 R1919x7 5x114.330TiresRims

D60 1.5T

166 hp · 1.5 L 15E4E I4 Petrol 1.5 L 15E4E I4 215/65 R17 3 fitments
GenerationD60 2019–2024
MarketLatin America
Power166 hp
Engine1.5 L 15E4E I4 Petrol 1.5 L 15E4E I4, Petrol
Center bore61.4 mm
PCD5x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE215/65 R1717x6.5 5x114.330TiresRims
OE235/55 R1818x7 5x114.330TiresRims
OE235/50 R1919x7 5x114.330TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.