Skip to content

2023 Maxus G20 ES tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2023 Maxus G20 ES.

2023 Maxus G20 ES tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2023

Open a trim for its factory package and every alternative size, front and rear.

Maxus G20 ES G20 ES

2023 – 2025 2 trims

G20 ES 2.0TD

161 hp · 2.0 L SC20M163 I4 Diesel 2.0 L SC20M163 I4 225/55 R18 4 fitments
GenerationG20 ES 2023–2025
MarketChina
Power161 hp
Engine2.0 L SC20M163 I4 Diesel 2.0 L SC20M163 I4, Diesel
Center bore92.2 mm
PCD6x139.7
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/55 R1818x6.5 ET56 6x139.742TiresRims
Alt215/70 R1616x6.5 ET56 6x139.742TiresRims
Alt215/65 R1717x6.5 ET56 6x139.742TiresRims
Alt225/60 R1717x6.5 ET56 6x139.742TiresRims

G20 ES 2.0TGI

257 hp · 2.0 L 20A4E I4 Petrol 2.0 L 20A4E I4 225/55 R18 4 fitments
GenerationG20 ES 2023–2025
MarketChina
Power257 hp
Engine2.0 L 20A4E I4 Petrol 2.0 L 20A4E I4, Petrol
Center bore92.2 mm
PCD6x139.7
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/55 R1818x6.5 ET56 6x139.742TiresRims
Alt215/70 R1616x6.5 ET56 6x139.742TiresRims
Alt215/65 R1717x6.5 ET56 6x139.742TiresRims
Alt225/60 R1717x6.5 ET56 6x139.742TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.