1984 Mazda 929 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1984 Mazda 929.

1984 Mazda 929 tire sizes

195/70R14 195/65R15

Bolt pattern

4x114.3

Other years

1980 1981 1982 1983 1984 1985 1986 1987 All 1978–1995

Fitment tables

4 trims sold in 1984

Open a trim for its factory package and every alternative size, front and rear.

Mazda 929 HB

1981 – 1987 Europe market 4 trims

929 2.0

89 hp · F/MA I4 195/70 R14 91H 2 fitments

GenerationHB 1981–1987

Power89 hp

EngineF/MA I4, Petrol

Center bore59.6 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/70 R14 91H	14x5.5 ET45 ~~4x114.3~~	2.1	Tires Rims
195/65 R15 91H	15x6 ET50 ~~4x114.3~~	29	Tires Rims

929 2.0 2bbl

99 hp · FE I4 195/70 R14 91H 2 fitments

GenerationHB 1981–1987

Power99 hp

EngineFE I4, Petrol

Center bore59.6 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/70 R14 91H	14x5.5 ET45 ~~4x114.3~~	2.1	Tires Rims
195/65 R15 91H	15x6 ET50 ~~4x114.3~~	29	Tires Rims

929 2.0i

117 hp · FE I4 195/70 R14 91H 2 fitments

GenerationHB 1981–1987

Power117 hp

EngineFE I4, Petrol

Center bore59.6 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/70 R14 91H	14x5.5 ET45 ~~4x114.3~~	2.1	Tires Rims
195/65 R15 91V	15x6 ET50 ~~4x114.3~~	29	Tires Rims

929 2.0T

119 hp · FET I4 195/70 R14 91H 2 fitments

GenerationHB 1981–1987

Power119 hp

EngineFET I4, Petrol

Center bore59.6 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/70 R14 91H	14x5.5 ET45 ~~4x114.3~~	2.1	Tires Rims
195/65 R15 91H	15x6 ET50 ~~4x114.3~~	29	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.