Skip to content

2021 Mazda Atenza tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2021 Mazda Atenza.

2021 Mazda Atenza tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2021

Open a trim for its factory package and every alternative size, front and rear.

Mazda Atenza III (GJ) Facelift

2018 – 2021 2 trims

Atenza 2.0 Skyactiv-G

156 hp · 2.0 L PE-VPR I4 Petrol 2.0 L PE-VPR I4 225/55 R17 4 fitments
GenerationIII (GJ) Facelift 2018–2021
MarketChina
Power156 hp
Engine2.0 L PE-VPR I4 Petrol 2.0 L PE-VPR I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/55 R1717x7.5 ET50 5x114.333TiresRims
Alt225/50 R1818x7.5 ET48 5x114.333TiresRims
Alt225/45 ZR1919x7.5 ET45 5x114.333TiresRims
Alt245/40 ZR1919x8 ET45 5x114.336TiresRims

Atenza 2.5 Skyactiv-G

189 hp · 2.5 L PY-RPR I4 Petrol 2.5 L PY-RPR I4 225/45 ZR19 4 fitments
GenerationIII (GJ) Facelift 2018–2021
MarketChina
Power189 hp
Engine2.5 L PY-RPR I4 Petrol 2.5 L PY-RPR I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/45 ZR1919x7.5 ET45 5x114.333TiresRims
Alt225/55 R1717x7.5 ET50 5x114.333TiresRims
Alt245/40 ZR1919x8 ET45 5x114.336TiresRims
Alt245/35 ZR2020x8 ET45 5x114.336TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.