Skip to content

1996 Mazda AZ Wagon tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1996 Mazda AZ Wagon.

1996 Mazda AZ Wagon tire sizes

Bolt pattern
Fitment tables

5 trims sold in 1996

Open a trim for its factory package and every alternative size, front and rear.

Mazda AZ Wagon CZ\CY

1994 – 1998 Japan market 5 trims

AZ Wagon 660 ZG (E-CY21S)

54 hp · I3 135x SR12 2 fitments
GenerationCZ\CY 1994–1998
Power54 hp
EngineI3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
135x SR1212x3.5 ET45 4x1001.6TiresRims
155/65 SR1313x4 ET45 4x1001.8TiresRims

AZ Wagon 660 ZG-4S (E-CZ21S)

63 hp · I3 155/65 SR13 2 fitments
GenerationCZ\CY 1994–1998
Power63 hp
EngineI3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/65 SR1313x4 ET45 4x1001.8TiresRims
155/55 SR1414x4.5 ET45 4x1001.8TiresRims

AZ Wagon 660 ZT (E-CY21S)

63 hp · I3 155/65 SR13 2 fitments
GenerationCZ\CY 1994–1998
Power63 hp
EngineI3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/65 SR1313x4 ET45 4x1001.8TiresRims
155/55 SR1414x4.5 ET45 4x1001.8TiresRims

AZ Wagon 660 ZV (E-CZ21S)

63 hp · I3 155/65 SR13 2 fitments
GenerationCZ\CY 1994–1998
Power63 hp
EngineI3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/65 SR1313x4 ET45 4x1001.8TiresRims
155/55 SR1414x4.5 ET45 4x1001.8TiresRims

AZ Wagon 660 ZX (E-CY21S)

63 hp · I3 155/65 SR13 2 fitments
GenerationCZ\CY 1994–1998
Power63 hp
EngineI3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/65 SR1313x4 ET45 4x1001.8TiresRims
155/55 SR1414x4.5 ET45 4x1001.8TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.