2009 Mazda AZ Wagon tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2009 Mazda AZ Wagon.

2009 Mazda AZ Wagon tire sizes

155/65RS14 165/55RH15 145/80RS13

Bolt pattern

4x100

Other years

2005 2006 2007 2008 2009 2010 2011 2012 All 1994–2012

Fitment tables

4 trims sold in 2009

Open a trim for its factory package and every alternative size, front and rear.

Mazda AZ Wagon MJ23

2008 – 2012 Japan market 4 trims

AZ Wagon 660 XF (DBA-MJ23S)

54 hp · I3 145/80 SR13 2 fitments

GenerationMJ23 2008–2012

Power54 hp

EngineI3, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
145/80 SR13	13x4 ET45 ~~4x100~~	1.6	Tires Rims
155/65 SR14	14x4.5 ET50 ~~4x100~~	1.8	Tires Rims

AZ Wagon 660 XG (DBA-MJ23S)

54 hp · I3 145/80 SR13 2 fitments

GenerationMJ23 2008–2012

Power54 hp

EngineI3, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
145/80 SR13	13x4 ET45 ~~4x100~~	1.6	Tires Rims
155/65 SR14	14x4.5 ET50 ~~4x100~~	1.8	Tires Rims

AZ Wagon 660 XS (DBA-MJ23S)

54 hp · I3 155/65 SR14 2 fitments

GenerationMJ23 2008–2012

Power54 hp

EngineI3, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155/65 SR14	14x4.5 ET50 ~~4x100~~	1.8	Tires Rims
165/55 HR15	15x5 ET45 ~~4x100~~	1.8	Tires Rims

AZ Wagon 660 XT (CBA-MJ23S)

63 hp · I3 155/65 SR14 2 fitments

GenerationMJ23 2008–2012

Power63 hp

EngineI3, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155/65 SR14	14x4.5 ET50 ~~4x100~~	1.8	Tires Rims
165/55 HR15	15x5 ET45 ~~4x100~~	1.8	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.