Skip to content

2020 Mazda Bongo Truck tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2020 Mazda Bongo Truck.

2020 Mazda Bongo Truck tire sizes

Bolt patterns
5x114.3
S400, SL

2 generations were sold in 2020. Check your chassis code before ordering wheels.

Fitment tables

4 trims sold in 2020

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Mazda Bongo Truck S400

2020 – 2025 Japan market 2 trims

Bongo Truck 1.5i (5BF-S403F)

95 hp · 1.5L 2NR-VE I4 165/80 R14 97L 2 fitments
GenerationS400 2020–2025
Power95 hp
Engine1.5L 2NR-VE I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165/80 R14 97L14x5 ET50 5x114.32.6TiresRims
175/80 R14 99N14x5 ET50 5x114.32.6TiresRims

Bongo Truck 1.5i (5BF-S413F)

95 hp · 1.5L 2NR-VE I4 165/80 R14 97L 2 fitments
GenerationS400 2020–2025
Power95 hp
Engine1.5L 2NR-VE I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165/80 R14 97L14x5 ET50 5x114.32.6TiresRims
175/80 R14 99N14x5 ET50 5x114.32.6TiresRims

Mazda Bongo Truck SL

2016 – 2020 Japan market 2 trims

Bongo Truck 1.8i (DBF-SLP2L)

101 hp · 1.8L L8 I4 185/80 R14 97N / 185/80 R14 100N 1 fitment
GenerationSL 2016–2020
Power101 hp
Engine1.8L L8 I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front185/80 R14 97N14x5 ET50 5x114.351TiresRims
Rear185/80 R14 100N14x5 ET50 5x114.362TiresRims

Bongo Truck 1.8i (DBF-SLP2T)

101 hp · 1.8L L8 I4 185/80 R14 97N 1 fitment
GenerationSL 2016–2020
Power101 hp
Engine1.8L L8 I4, Petrol
Center bore108.1 mm
PCD6x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/80 R14 97N14x5 ET50 6x139.74.3TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.