Skip to content

2015 Mazda Bongo Van tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2015 Mazda Bongo Van.

2015 Mazda Bongo Van tire sizes

Fitment tables

3 trims sold in 2015

Open a trim for its factory package and every alternative size, front and rear.

Mazda Bongo Van SK

1999 – 2016 Japan market 3 trims

Bongo Van 1.8i (ABF-SKP2M)

101 hp · 1.8L L8 I4 185x R14 1 fitment
GenerationSK 1999–2016
Power101 hp
Engine1.8L L8 I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185x R1414x5 ET50 5x114.351TiresRims

Bongo Van 1.8i (ABF-SKP2V)

101 hp · 1.8L L8 I4 165x R14 1 fitment
GenerationSK 1999–2016
Power101 hp
Engine1.8L L8 I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165x R1414x4.5 ET50 5x114.351 F / 54 RTiresRims

Bongo Van 1.8i (ABF-SKP2V) DRW

101 hp · 1.8L L8 I4 165x R14 1 fitment
GenerationSK 1999–2016
Power101 hp
Engine1.8L L8 I4, Petrol
Center borefront axis 67.1 mm rear axis 131.1 mm
PCDfront axis 5x114.3 ( 5x4.5 )rear axis 4x150
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165x R1412x3.5 ET87 front axis 5x114.3 ( 5x4.5 )rear axis 4x1503TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.