1997 Mazda Bongo Wagon tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1997 Mazda Bongo Wagon.

1997 Mazda Bongo Wagon tire sizes

Bolt patterns

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1989 – 1999 Japan market 2 trims

90 hp · I4 185x R14 2 fitments

GenerationSS 1989–1999

Power90 hp

EngineI4, Diesel

Center bore108 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185x R14	14x5 ET40 ~~6x139.7~~	–	Tires Rims
205/70 SR15	15x6 ET40 ~~6x139.7~~	–	Tires Rims

90 hp · I4 165x R14 2 fitments

GenerationSS 1989–1999

Power90 hp

EngineI4, Diesel

Center bore60.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165x R14	14x4.5 ET44 ~~4x114.3~~	–	Tires Rims
185/65 SR15	15x5.5 ET45 ~~4x114.3~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.