1993 Mazda Capella tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1993 Mazda Capella.

1993 Mazda Capella tire sizes

195/60RH15

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1989 – 1994 1 trim

143 hp · 2.0 L FE-DE I4 Petrol 2.0 L FE-DE I4 195/60 HR15 1 fitment

GenerationGD Facelift 1989–1994

MarketJapan

Power143 hp

Engine2.0 L FE-DE I4 Petrol 2.0 L FE-DE I4, Petrol

Center bore59.6 mm

PCD5x114.3

ThreadM12 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	195/60 HR15	15x6 ET50 ~~5x114.3~~	32 F / 29 R	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.