1992 Mazda Carol tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1992 Mazda Carol.

1992 Mazda Carol tire sizes

155/70R12 155/65R13

Bolt pattern

4x100

Other years

1989 1990 1991 1992 1993 1994 1995 1996 All 1989–2027

Fitment tables

4 trims sold in 1992

Open a trim for its factory package and every alternative size, front and rear.

Mazda Carol AA

1989 – 1995 Japan market 4 trims

Carol 660 (E-AA6PA)

51 hp · 0.66L I3 135x SR12 2 fitments

GenerationAA 1989–1995

Power51 hp

Engine0.66L I3, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
135x SR12	12x4 ET45 ~~4x100~~	23	Tires Rims
155/70 R12 73S	12x4 ET45 ~~4x100~~	26	Tires Rims

Carol 660 (E-AA6PA)

42 hp · 0.66L I3 135x SR12 2 fitments

GenerationAA 1989–1995

Power42 hp

Engine0.66L I3, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
135x SR12	12x4 ET45 ~~4x100~~	23	Tires Rims
155/70 R12 73S	12x4 ET45 ~~4x100~~	26	Tires Rims

Carol 660 (E-AA6RA)

42 hp · 0.66L I3 155/70 R12 73S 2 fitments

GenerationAA 1989–1995

Power42 hp

Engine0.66L I3, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155/70 R12 73S	12x4 ET45 ~~4x100~~	26	Tires Rims
155/65 R13 73S	13x4.5 ET45 ~~4x100~~	26	Tires Rims

Carol 660 (E-AA6RA)

51 hp · 0.66L I3 155/70 R12 73S 2 fitments

GenerationAA 1989–1995

Power51 hp

Engine0.66L I3, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155/70 R12 73S	12x4 ET45 ~~4x100~~	26	Tires Rims
155/65 R13 73S	13x4.5 ET45 ~~4x100~~	26	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.