2013 Mazda Flair Wagon Custom Style tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2013 Mazda Flair Wagon Custom Style.

2013 Mazda Flair Wagon Custom Style tire sizes

165/55R15 155/65R14

Bolt pattern

4x100

Other years

2013 2014 2015 2016 2017 2018 2019 2020 All 2013–2026

Fitment tables

2 trims sold in 2013

Open a trim for its factory package and every alternative size, front and rear.

Mazda Flair Wagon Custom Style MM3

2013 – 2015 Japan market 2 trims

Flair Wagon Custom Style 660 (DBA-MM32S)

51 hp · 0.66L R06A I3 155/65 R14 75S 2 fitments

GenerationMM3 2013–2015

Power51 hp

Engine0.66L R06A I3, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155/65 R14 75S	14x4.5 ET45 ~~4x100~~	35	Tires Rims
165/55 R15 75V	15x4.5 ET45 ~~4x100~~	35	Tires Rims

Flair Wagon Custom Style 660T (DBA-MM32S)

63 hp · 0.66L R06A I3 165/55 R15 75V 2 fitments

GenerationMM3 2013–2015

Power63 hp

Engine0.66L R06A I3, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/55 R15 75V	15x4.5 ET45 ~~4x100~~	35	Tires Rims
165/55 R15 75V	15x5 ET45 ~~4x100~~	35	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.