2026 Mazda Flair Wagon tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2026 Mazda Flair Wagon.

2026 Mazda Flair Wagon tire sizes

155/65R14 165/55R15

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2023 – 2027 2 trims

48 hp · 0.66 L R06D WA04C I3 Petrol 0.66 L R06D WA04C I3 155/65 R14 3 fitments

GenerationMM5/MM9 2023–2027

MarketJapan

Power48 hp

Engine0.66 L R06D WA04C I3 Petrol 0.66 L R06D WA04C I3, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	155/65 R14	14x4.5 ET45 ~~4x100~~	35	Tires Rims
Alt	165/55 R15	15x4.5 ET45 ~~4x100~~	35	Tires Rims
Alt	165/55 R15	15x5 ET45 ~~4x100~~	35	Tires Rims

63 hp · 0.66 L R06A WA05A I3 Petrol 0.66 L R06A WA05A I3 155/65 R14 3 fitments

GenerationMM5/MM9 2023–2027

MarketJapan

Power63 hp

Engine0.66 L R06A WA05A I3 Petrol 0.66 L R06A WA05A I3, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	155/65 R14	14x4.5 ET45 ~~4x100~~	35	Tires Rims
Alt	165/55 R15	15x4.5 ET45 ~~4x100~~	35	Tires Rims
Alt	165/55 R15	15x5 ET45 ~~4x100~~	35	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.