Skip to content

1992 Mazda MX-6 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1992 Mazda MX-6.

Bolt pattern
Fitment tables

4 trims sold in 1992

Open a trim for its factory package and every alternative size, front and rear.

Mazda MX-6 GE

1992 – 1998 4 trims

MX-6 2.0i

118 hp · I4 195/65 R14 88H 3 fitments
GenerationGE 1992–1998
MarketUSA
Power118 hp
EngineI4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R14 88H14x6.5 ET45 5x114.330TiresRims
205/55 R15 87V15x6.5 ET45 5x114.330TiresRims
205/50 R16 85V16x6.5 ET45 5x114.333TiresRims

MX-6 2.0i (E-GEEB)

158 hp · V6 195/65 R14 89H 4 fitments
GenerationGE 1992–1998
MarketJapan
Power158 hp
EngineV6, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R14 89H14x5.5 ET45 5x114.330TiresRims
195/60 R15 87H15x6 ET48 5x114.330TiresRims
205/55 R15 87V15x6.5 ET45 5x114.330TiresRims
205/50 R16 85V16x6.5 ET42 5x114.333TiresRims

MX-6 2.5i

164 hp · V6 205/55 R15 87V 3 fitments
GenerationGE 1992–1998
MarketUSA
Power164 hp
EngineV6, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 R15 87V15x6.5 ET45 5x114.330TiresRims
205/50 R16 85V16x6.5 ET48 5x114.333TiresRims
215/45 ZR17 88W17x7 ET42 5x114.333TiresRims

MX-6 2.5i (E-GE5B)

197 hp · V6 205/55 R15 87V 4 fitments
GenerationGE 1992–1998
MarketJapan
Power197 hp
EngineV6, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 R15 87V15x6.5 ET45 5x114.330TiresRims
205/50 R16 85V16x6.5 ET48 5x114.333TiresRims
205/45 ZR17 86W17x7 ET45 5x114.333TiresRims
215/45 ZR17 87W17x7 ET42 5x114.333TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.