Skip to content

2008 Mazda Premacy tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2008 Mazda Premacy.

Bolt pattern
Fitment tables

4 trims sold in 2008

Open a trim for its factory package and every alternative size, front and rear.

Mazda Premacy CR

2005 – 2010 4 trims

Premacy 2.0i (CBA-CREW)

149 hp · I4 195/65 R15 91H 3 fitments
GenerationCR 2005–2010
Power149 hp
EngineI4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 91H15x6 ET52.5 5x114.332TiresRims
205/55 R16 89H16x6.5 ET52.5 5x114.332TiresRims
205/50 R17 87V17x6.5 ET52.5 5x114.335TiresRims

Premacy 2.0i (DBA-CREW)

149 hp · I4 195/65 R15 91H 3 fitments
GenerationCR 2005–2010
Power149 hp
EngineI4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 91H15x6 ET52.5 5x114.332TiresRims
205/55 R16 89H16x6.5 ET52.5 5x114.332TiresRims
205/50 R17 87V17x6.5 ET52.5 5x114.335TiresRims

Premacy 2.0i Z (DBA-CREW)

149 hp · I4 205/50 R17 87V 3 fitments
GenerationCR 2005–2010
Power149 hp
EngineI4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/50 R17 87V17x6.5 ET52.5 5x114.335TiresRims
215/45 R17 89V17x7 ET52 5x114.335TiresRims
225/40 R18 89V18x7.5 ET48 5x114.335TiresRims

Premacy 2.3i (DBA-CR3W)

162 hp · I4 205/55 R16 89V 3 fitments
GenerationCR 2005–2010
Power162 hp
EngineI4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 R16 89V16x6.5 ET52.5 5x114.332TiresRims
205/50 R17 87V17x6.5 ET52.5 5x114.335TiresRims
215/45 R18 89V18x7 ET50 5x114.335TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.