1996 Mazda Proceed tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1996 Mazda Proceed.

1996 Mazda Proceed tire sizes

225/70R16

Bolt pattern

6x139.7

2 generations were sold in 1996. Check your chassis code before ordering wheels.

Other years

1992 1993 1994 1995 1996 1997 1998 1999 All 1990–1999

Fitment tables

2 trims sold in 1996

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Mazda Proceed UF Facelift

1996 – 1999 Japan market 1 trim

Proceed 2.6i (GA-UF66M)

118 hp · I4 215x R15 2 fitments

GenerationUF Facelift 1996–1999

Power118 hp

EngineI4, Petrol

Center bore108 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215x R15	15x6 ET30 ~~6x139.7~~	2.2	Tires Rims
225/70 R16	16x6.5 ET30 ~~6x139.7~~	2.2	Tires Rims

Mazda Proceed UF

1990 – 1996 Japan market 1 trim

Proceed 2.6i (T-UF66M)

118 hp · I4 215x R15 2 fitments

GenerationUF 1990–1996

Power118 hp

EngineI4, Petrol

Center bore108 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215x R15	15x6 ET30 ~~6x139.7~~	2.2	Tires Rims
225/70 R16	16x6.5 ET30 ~~6x139.7~~	2.2	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.