1984 Mazda RX-7 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1984 Mazda RX-7.

1984 Mazda RX-7 tire sizes

Bolt patterns

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1984 – 1985 3 trims

101 hp · 12A R 165x HR13 2 fitments

GenerationFB 1984–1985

MarketUSA

Power101 hp

Engine12A R, Petrol

Center bore59.6 mm

PCD4x110

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165x HR13	13x5 ET20 ~~4x110~~	–	Tires Rims
185/70 HR13	13x5.5 ET20 ~~4x110~~	–	Tires Rims

103 hp · 12A R 165x HR13 2 fitments

GenerationFB 1984–1985

MarketEurope

Power103 hp

Engine12A R, Petrol

Center bore59.6 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165x HR13	13x5 ET20 ~~4x114.3~~	–	Tires Rims
185/70 HR13	13x5.5 ET20 ~~4x114.3~~	–	Tires Rims

135 hp · 13B R 205/60 VR14 2 fitments

GenerationFB 1984–1985

MarketUSA

Power135 hp

Engine13B R, Petrol

Center bore59.6 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/60 VR14	14x5.5 ET20 ~~4x114.3~~	–	Tires Rims
205/55 VR15	15x6 ET20 ~~4x114.3~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.