Skip to content
tirewheelguide.com

2002 Mazda RX-7 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2002 Mazda RX-7.

2002 Mazda RX-7 tire sizes

225/50R16235/45R17235/40R18255/40R17265/35R18
Bolt pattern
Other years
19961997199819992000200120022003 All 1979–2003
Fitment tables

3 trims sold in 2002

Open a trim for its factory package and every alternative size, front and rear.

Mazda RX-7 FD

1992 – 2003 3 trims

RX-7 1.3 Turbo (GF-FD3S)

276 hp · 13B R 235/45 R17 / 255/40 R17 3 fitments
GenerationFD 1992–2003
Power276 hp
Engine13B R, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front235/45 R1717x8 ET50 5x114.3–TiresRims
Rear255/40 R1717x8.5 ET50 5x114.3–TiresRims
Front235/40 R1818x8 ET45 5x114.3–TiresRims
Rear265/35 R1818x9 ET45 5x114.3–TiresRims
225/50 R16 92V16x8 ET50 5x114.3–TiresRims

RX-7 1.3 Turbo (GF-FD3S)

252 hp · 13B R 235/45 R17 / 255/40 R17 3 fitments
GenerationFD 1992–2003
Power252 hp
Engine13B R, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front235/45 R1717x8 ET50 5x114.3–TiresRims
Rear255/40 R1717x8.5 ET50 5x114.3–TiresRims
Front235/40 R1818x8 ET45 5x114.3–TiresRims
Rear265/35 R1818x9 ET45 5x114.3–TiresRims
225/50 R16 92V16x8 ET50 5x114.3–TiresRims

RX-7 1.3 Turbo (GF-FD3S)

261 hp · 13B R 225/50 R16 92V 3 fitments
GenerationFD 1992–2003
Power261 hp
Engine13B R, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/50 R16 92V16x8 ET50 5x114.3–TiresRims
235/45 R1717x8.5 ET50 5x114.32.4TiresRims
235/40 R1818x9 ET45 5x114.32.4TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.

Open the size calculator
Recent articles

Guides worth reading first

All articles
Basics

How to read a tire sidewall

Reading a tire sidewall is easy. Find out what the size, load index, speed rating and date code mean.

Continue reading
Guide

Everything you need to know about tire tread depth

Tire tread depth is an important factor in keeping your vehicle safe — how to measure it and when to replace.

Continue reading
Gear

Best supercapacitor jump starter review

We tested seven supercapacitor jump starters to find the ones worth buying.

Continue reading