1991 Mazda Sentia tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1991 Mazda Sentia.

1991 Mazda Sentia tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1991 – 1995 Japan market 2 trims

158 hp · V6 205/65 R15 93H 4 fitments

GenerationHD 1991–1995

Power158 hp

EngineV6, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/65 R15 93H	15x6 ET50 ~~5x114.3~~	32	Tires Rims
205/60 R16 92H	16x6.5 ET55 ~~5x114.3~~	32	Tires Rims
215/55 R16 91V	16x7 ET50 ~~5x114.3~~	32	Tires Rims
215/50 R17 90V	17x7 ET48 ~~5x114.3~~	35	Tires Rims

197 hp · V6 205/65 R15 93H 4 fitments

GenerationHD 1991–1995

Power197 hp

EngineV6, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/65 R15 93H	15x6 ET50 ~~5x114.3~~	32	Tires Rims
205/60 R16 91V	16x6.5 ET55 ~~5x114.3~~	32	Tires Rims
215/55 R16 92H	16x7 ET50 ~~5x114.3~~	32	Tires Rims
225/50 R17 91V	17x7.5 ET48 ~~5x114.3~~	35	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.