Skip to content

2024 Mercedes-Benz CLS-Class AMG tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2024 Mercedes-Benz CLS-Class AMG.

2024 Mercedes-Benz CLS-Class AMG tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2024

Open a trim for its factory package and every alternative size, front and rear.

Mercedes-Benz CLS-Class AMG C257 Facelift

2021 – 2024 2 trims

CLS-Class AMG CLS 53 (Coupe)

429 hp · 3.0 L M256 E30 I6 Petrol 3.0 L M256 E30 I6 245/40 ZR19 / 275/35 ZR19 4 fitments
GenerationC257 Facelift 2021–2024
MarketUSA
Power429 hp
Engine3.0 L M256 E30 I6 Petrol 3.0 L M256 E30 I6, Petrol
Center bore66.6 mm
PCD5x112
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront245/40 ZR1919x8 ET10 5x11236TiresRims
Rear275/35 ZR1919x9 ET28 5x11239TiresRims
OEFront245/35 ZR2020x8 ET10 5x11239TiresRims
Rear275/30 ZR2020x9 ET28 5x11239TiresRims
AltFront245/40 R1919x8 ET10 5x11236TiresRims
Rear275/35 R1919x9 ET28 5x11239TiresRims
AltFront245/40 R1919x8 ET10 5x11236TiresRims
Rear245/40 R1919x8 ET33 5x11236TiresRims

CLS-Class AMG CLS 53 4AA-247361 (Coupe)

429 hp · 3.0 L M256 E30 I6 Petrol 3.0 L M256 E30 I6 245/40 ZR19 / 275/35 ZR19 4 fitments
GenerationC257 Facelift 2021–2024
MarketJapan
Power429 hp
Engine3.0 L M256 E30 I6 Petrol 3.0 L M256 E30 I6, Petrol
Center bore66.6 mm
PCD5x112
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront245/40 ZR1919x8 ET10 5x11236TiresRims
Rear275/35 ZR1919x9 ET28 5x11239TiresRims
OEFront245/35 ZR2020x8 ET10 5x11239TiresRims
Rear275/30 ZR2020x9 ET28 5x11239TiresRims
AltFront245/40 R1919x8 ET10 5x11236TiresRims
Rear275/35 R1919x9 ET28 5x11239TiresRims
AltFront245/40 R1919x8 ET10 5x11236TiresRims
Rear245/40 R1919x8 ET33 5x11236TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.