Skip to content

2008 Mercedes-Benz G-Class AMG tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2008 Mercedes-Benz G-Class AMG.

2008 Mercedes-Benz G-Class AMG tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2008

Open a trim for its factory package and every alternative size, front and rear.

Mercedes-Benz G-Class AMG W463

2002 – 2018 2 trims

G-Class AMG G 55 K

500 hp · 5.4L M113 V8 275/55 R19 111V 4 fitments
GenerationW463 2002–2018
Power500 hp
Engine5.4L M113 V8, Petrol
Center bore84.1 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
275/55 R19 111V19x9.5 ET50 5x13035TiresRims
285/55 R19 110V19x9.5 ET50 5x13035TiresRims
275/50 R20 110V20x9.5 ET50 5x13036TiresRims
295/40 ZR21 110W21x10 ET45 5x13038TiresRims

G-Class AMG G 55 K

493 hp · 5.5L M113 V8 265/60 R18 110V 4 fitments
GenerationW463 2002–2018
Power493 hp
Engine5.5L M113 V8, Petrol
Center bore84.1 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
265/60 R18 110V18x7.5 ET63 5x13032TiresRims
285/55 R18 113V18x9.5 ET50 5x13035TiresRims
275/55 R19 111V19x9.5 ET50 5x13035TiresRims
275/50 ZR20 113W20x9.5 ET50 5x13036TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.