Skip to content

2016 Mercedes-Benz G-Class AMG tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2016 Mercedes-Benz G-Class AMG.

2016 Mercedes-Benz G-Class AMG tire sizes

Bolt pattern
Fitment tables

4 trims sold in 2016

Open a trim for its factory package and every alternative size, front and rear.

Mercedes-Benz G-Class AMG W463

2002 – 2018 4 trims

G-Class AMG G 63

563 hp · 5.5L V8 275/50 ZR20 113W 2 fitments
GenerationW463 2002–2018
MarketUSA
Power563 hp
Engine5.5L V8, Petrol
Center bore84.1 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
275/50 ZR20 113W20x9.5 ET50 5x13036TiresRims
295/40 ZR21 111W21x10 ET45 5x13038TiresRims

G-Class AMG G 63

563 hp · 5.5L V8 275/50 ZR20 113W 2 fitments
GenerationW463 2002–2018
MarketEurope
Power563 hp
Engine5.5L V8, Petrol
Center bore84.1 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
275/50 ZR20 113W20x9.5 ET50 5x13036TiresRims
295/40 ZR21 111W21x10 ET45 5x13038TiresRims

G-Class AMG G 65

621 hp · 6.0L M275 V12 295/40 ZR21 111W 2 fitments
GenerationW463 2002–2018
MarketUSA
Power621 hp
Engine6.0L M275 V12, Petrol
Center bore84.1 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
295/40 ZR21 111W21x10 ET45 5x13038TiresRims
275/50 ZR20 113W20x9.5 ET50 5x13036TiresRims

G-Class AMG G 65

621 hp · 6.0L M275 V12 275/50 ZR20 113W 2 fitments
GenerationW463 2002–2018
MarketEurope
Power621 hp
Engine6.0L M275 V12, Petrol
Center bore84.1 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
275/50 ZR20 113W20x9.5 ET50 5x13036TiresRims
295/40 ZR21 111W21x10 ET45 5x13038TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.