Skip to content

2012 Mercedes-Benz G-Class tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2012 Mercedes-Benz G-Class.

Bolt pattern
Fitment tables

3 trims sold in 2012

Open a trim for its factory package and every alternative size, front and rear.

Mercedes-Benz G-Class W463

1990 – 2018 3 trims

G-Class G 350 BlueTec

208 hp · 3.0L OM642 V6 265/70 R16 112H 6 fitments
GenerationW463 1990–2018
MarketEurope
Power208 hp
Engine3.0L OM642 V6, Diesel
Center bore84.1 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
265/70 R16 112H16x7.5 ET63 5x13029TiresRims
265/70 R16 112T16x7.5 ET43 5x13029TiresRims
265/65 R17 110H17x7.5 ET63 5x13032TiresRims
265/60 R18 109H18x7.5 ET63 5x13032TiresRims
265/60 R18 110V18x7.5 ET43 5x13032TiresRims
265/55 R19 109H19x9.5 ET50 5x13035TiresRims

G-Class G 500

382 hp · 5.5L V8 265/60 R18 109H 6 fitments
GenerationW463 1990–2018
MarketEurope
Power382 hp
Engine5.5L V8, Petrol
Center bore84.1 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
265/60 R18 109H18x7.5 ET63 5x13032TiresRims
265/60 R18 110V18x7.5 ET43 5x13032TiresRims
285/55 R18 113V18x9.5 ET50 5x13035TiresRims
265/55 R19 109H19x9.5 ET50 5x13035TiresRims
275/55 R19 111V19x9.5 ET50 5x13035TiresRims
275/50 ZR20 113W20x9.5 ET50 5x13036TiresRims

G-Class G 550

382 hp · 5.5L V8 265/60 R18 109H 6 fitments
GenerationW463 1990–2018
MarketUSA
Power382 hp
Engine5.5L V8, Petrol
Center bore84.1 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
265/60 R18 109H18x7.5 ET63 5x13032TiresRims
265/60 R18 110V18x7.5 ET43 5x13032TiresRims
285/55 R18 113V18x9.5 ET50 5x13035TiresRims
265/55 R19 109H19x9.5 ET50 5x13035TiresRims
275/55 R19 111V19x9.5 ET50 5x13035TiresRims
275/50 ZR20 113W20x9.5 ET50 5x13035TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.