Skip to content

2007 Mercedes-Benz M-Class AMG tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2007 Mercedes-Benz M-Class AMG.

2007 Mercedes-Benz M-Class AMG tire sizes

Bolt pattern
Fitment tables

1 trim sold in 2007

Open a trim for its factory package and every alternative size, front and rear.

Mercedes-Benz M-Class AMG W164

2006 – 2011 Europe market 1 trim

M-Class AMG ML 63

503 hp · 6.2L V8 255/50 ZR19 103W / 285/45 ZR19 107W 13 fitments
GenerationW164 2006–2011
Power503 hp
Engine6.2L V8, Petrol
Center bore66.6 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front255/50 ZR19 103W19x8.5 ET58 5x11235TiresRims
Rear285/45 ZR19 107W19x9.5 ET56 5x11235TiresRims
Front265/40 ZR21 105W21x9 ET60 5x11235TiresRims
Rear265/40 ZR21 105W21x9 ET48 5x11235TiresRims
255/50 R19 103H19x8.5 ET58 5x11235TiresRims
255/50 ZR19 103W19x8.5 ET58 5x11235TiresRims
285/45 R19 103H19x9.5 ET46 5x11235TiresRims
285/45 ZR19 107W19x9.5 ET46 5x11235TiresRims
295/45 ZR19 109W19x9.5 ET46 5x11235TiresRims
265/45 ZR20 104W20x8.5 ET60 5x11235TiresRims
295/40 ZR20 106W20x10 ET46 5x11235TiresRims
265/40 ZR21 105W21x9 ET60 5x11235TiresRims
295/35 ZR21 107Y21x10 ET46 5x11235TiresRims
295/35 ZR21 107Y21x10 ET41 5x11235TiresRims
295/35 ZR21 107Y21x10 ET37 5x11238TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.