Skip to content

2014 Mercedes-Benz M-Class AMG tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2014 Mercedes-Benz M-Class AMG.

2014 Mercedes-Benz M-Class AMG tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2014

Open a trim for its factory package and every alternative size, front and rear.

Mercedes-Benz M-Class AMG W166

2011 – 2015 Europe market 2 trims

M-Class AMG ML 63

518 hp · 5.5L V8 255/50 R19 103H 9 fitments
GenerationW166 2011–2015
Power518 hp
Engine5.5L V8, Petrol
Center bore66.6 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
255/50 R19 103H19x8.5 ET59 5x11235TiresRims
255/50 ZR19 103W19x8.5 ET59 5x11235TiresRims
265/45 R20 104H20x9 ET57 5x11235TiresRims
265/45 ZR20 104Y20x9 ET47 5x11235TiresRims
265/45 ZR20 108Y20x9 ET41 5x11235TiresRims
265/45 R20 105V20x9 ET41 5x11235TiresRims
265/45 R20 108V20x9 ET41 5x11235TiresRims
265/40 ZR21 105Y21x9 ET53 5x11235TiresRims
295/35 ZR21 107Y21x10 ET56 5x11238TiresRims

M-Class AMG ML 63

550 hp · 5.5L V8 255/50 R19 103H 9 fitments
GenerationW166 2011–2015
Power550 hp
Engine5.5L V8, Petrol
Center bore66.6 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
255/50 R19 103H19x8.5 ET59 5x11235TiresRims
255/50 R19 103W19x8.5 ET59 5x11235TiresRims
265/45 R20 104H20x9 ET57 5x11235TiresRims
265/45 ZR20 104Y20x9 ET47 5x11235TiresRims
265/45 ZR20 108Y20x9 ET41 5x11235TiresRims
265/45 R20 105V20x9 ET41 5x11235TiresRims
265/45 R20 108V20x9 ET41 5x11235TiresRims
265/40 ZR21 105Y21x9 ET53 5x11235TiresRims
295/35 ZR21 107Y21x10 ET56 5x11238TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.