2010 Mercedes-Benz SL-Class AMG tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2010 Mercedes-Benz SL-Class AMG.

2010 Mercedes-Benz SL-Class AMG tire sizes

255/35R19 285/30R19 285/35R19

Bolt pattern

5x112

Other years

2006 2007 2008 2009 2010 2011 2012 2013 All 2001–2026

Fitment tables

2 trims sold in 2010

Open a trim for its factory package and every alternative size, front and rear.

Mercedes-Benz SL-Class AMG R230 Facelift

2008 – 2012 2 trims

SL-Class AMG SL 63

518 hp · 6.2L V8 255/35 ZR19 96Y / 285/30 ZR19 98Y 3 fitments

GenerationR230 Facelift 2008–2012

Power518 hp

Engine6.2L V8, Petrol

Center bore66.6 mm

PCD5x112

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front255/35 ZR19 96Y	19x8.5 ET30 ~~5x112~~	36	Tires Rims
Rear285/30 ZR19 98Y	19x9.5 ET31 ~~5x112~~	39	Tires Rims
Front255/35 ZR19 96Y	19x8.5 ET34 ~~5x112~~	36	Tires Rims
Rear285/30 ZR19 98Y	19x9.5 ET31 ~~5x112~~	36	Tires Rims
255/35 R19 96V	19x8.5 ET30 ~~5x112~~	2.7	Tires Rims

SL-Class AMG SL 65

603 hp · 6.0L V12 255/35 ZR19 96Y / 285/30 ZR19 98Y 3 fitments

GenerationR230 Facelift 2008–2012

Power603 hp

Engine6.0L V12, Petrol

Center bore66.6 mm

PCD5x112

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front255/35 ZR19 96Y	19x8.5 ET30 ~~5x112~~	36	Tires Rims
Rear285/30 ZR19 98Y	19x9.5 ET31 ~~5x112~~	39	Tires Rims
Front255/35 R19 96V	19x8.5 ET34 ~~5x112~~	36	Tires Rims
Rear285/30 R19 98V	19x9.5 ET31 ~~5x112~~	36	Tires Rims
Front255/35 ZR19 96Y	19x8.5 ET34 ~~5x112~~	36	Tires Rims
Rear285/35 ZR19 98Y	19x9.5 ET31 ~~5x112~~	39	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.