Skip to content

2019 Mercedes-Benz SLC-Class AMG tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2019 Mercedes-Benz SLC-Class AMG.

2019 Mercedes-Benz SLC-Class AMG tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2019

Open a trim for its factory package and every alternative size, front and rear.

Mercedes-Benz SLC-Class AMG R172

2016 – 2020 Europe market 2 trims

SLC-Class AMG SLC 43

385 hp · 3.0L V6 235/40 ZR18 95Y / 255/35 ZR18 94Y 2 fitments
GenerationR172 2016–2020
MarketEurope
Power385 hp
Engine3.0L V6, Petrol
Center bore66.6 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front235/40 ZR18 95Y18x8 ET43 5x11235TiresRims
Rear255/35 ZR18 94Y18x9 ET42 5x11238TiresRims
235/40 R18 95H18x8 ET42 5x1122.6TiresRims

SLC-Class AMG SLC 43 (CBA-172466)

385 hp · 3.0L 276M30 V6 235/40 ZR18 95Y / 255/35 ZR18 94Y 2 fitments
GenerationR172 2016–2020
MarketJapan
Power385 hp
Engine3.0L 276M30 V6, Petrol
Center bore66.6 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front235/40 ZR18 95Y18x8 ET43 5x11235TiresRims
Rear255/35 ZR18 94Y18x9 ET42 5x11238TiresRims
235/40 R18 95H18x8 ET42 5x1122.6TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.