1981 Mercury Lynx tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1981 Mercury Lynx.

1981 Mercury Lynx tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1981 – 1987 USA market 1 trim

68 hp · I4 155x R13 82Q 5 fitments

Generationl 1981–1987

Power68 hp

EngineI4, Petrol

Center bore63.4 mm

PCD4x108

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155x R13 82Q	13x4.5 ET41 ~~4x108~~	23	Tires Rims
165/80 R13 82Q	13x5 ET41 ~~4x108~~	25	Tires Rims
185/70 R13 81S	13x5.5 ET41 ~~4x108~~	26	Tires Rims
185/65 R14 80T	14x6 ET37 ~~4x108~~	29	Tires Rims
195/55 R15 79V	15x6.5 ET35 ~~4x108~~	32	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.