1965 Mercury Marauder tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1965 Mercury Marauder.

1965 Mercury Marauder tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1963 – 1965 USA market 1 trim

N/A · V8 205x R15 9 fitments

GenerationI 1963–1965

PowerN/A

EngineV8, Petrol

Center bore70.5 mm

PCD5x114.3

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205x R15	15x5.5 ET15 ~~5x114.3~~	26	Tires Rims
215/80 R15	15x6 ET12 ~~5x114.3~~	26	Tires Rims
225/75 R15	15x6.5 ET10 ~~5x114.3~~	29	Tires Rims
235/70 R15	15x7 ET6 ~~5x114.3~~	29	Tires Rims
215/70 R16	16x6.5 ET10 ~~5x114.3~~	26	Tires Rims
225/70 R16	16x7 ET5 ~~5x114.3~~	29	Tires Rims
235/65 R16	16x7.5 ET3 ~~5x114.3~~	30	Tires Rims
235/60 R17	17x7.5 ET3 ~~5x114.3~~	30	Tires Rims
255/50 R18	18x8 ET0 ~~5x114.3~~	33	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.