Skip to content

2001 Mercury Sable tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2001 Mercury Sable.

Fitment tables

2 trims sold in 2001

Open a trim for its factory package and every alternative size, front and rear.

Mercury Sable IV

2000 – 2005 USA market 2 trims

Sable 3.0i

197 hp · V6 205/65 R16 98S 6 fitments
GenerationIV 2000–2005
Power197 hp
EngineV6, Petrol
Center bore63.4 mm
PCD5x108
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/65 R16 98S16x6 ET42 5x10830TiresRims
215/60 R16 98T16x6 ET42 5x10830TiresRims
215/55 R17 97H17x6.5 ET40 5x10833TiresRims
225/50 R17 97H17x7 ET40 5x10833TiresRims
215/50 R18 97H18x7 ET40 5x10833TiresRims
225/45 R18 95V18x7.5 ET38 5x10836TiresRims

Sable 3.0i DOHC

237 hp · V6 205/65 R16 98T 6 fitments
GenerationIV 2000–2005
Power237 hp
EngineV6, Petrol
Center bore63.4 mm
PCD5x108
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/65 R16 98T16x6 ET42 5x10830TiresRims
215/60 R16 98T16x6.5 ET42 5x10830TiresRims
215/55 R17 97H17x6.5 ET40 5x10833TiresRims
225/50 R17 97H17x7 ET40 5x10833TiresRims
235/50 R17 98H17x7.5 ET38 5x10833TiresRims
235/45 R18 97V18x8 ET35 5x10836TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.