1991 Mercury Tracer tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1991 Mercury Tracer.

1991 Mercury Tracer tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1991 – 1996 USA market 2 trims

128 hp · I4 175/70 R13 84S 5 fitments

Generationll 1991–1996

Power128 hp

EngineI4, Petrol

Center bore57.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/70 R13 84S	13x5 ET45 ~~4x100~~	28	Tires Rims
175/65 R14 83T	14x5 ET45 ~~4x100~~	29	Tires Rims
185/55 R15 81H	15x5.5 ET47 ~~4x100~~	30	Tires Rims
195/50 R15 81H	15x6 ET42 ~~4x100~~	30	Tires Rims
195/45 R16 82V	16x6.5 ET42 ~~4x100~~	30	Tires Rims

89 hp · I4 175/70 R13 84S 5 fitments

Generationll 1991–1996

Power89 hp

EngineI4, Petrol

Center bore57.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/70 R13 84S	13x5 ET45 ~~4x100~~	28	Tires Rims
175/65 R14 83T	14x5 ET45 ~~4x100~~	29	Tires Rims
185/60 R14 83T	14x5.5 ET47 ~~4x100~~	29	Tires Rims
185/55 R15 81H	15x5.5 ET47 ~~4x100~~	30	Tires Rims
195/45 R16 82V	16x6 ET42 ~~4x100~~	30	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.