Skip to content

2015 MG 350 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2015 MG 350.

Fitment tables

3 trims sold in 2015

Open a trim for its factory package and every alternative size, front and rear.

MG 350 350

2012 – 2016 3 trims

350 1.5i

105 hp · 1.5L I4 205/55 ZR16 93W 5 fitments
Generation350 2012–2016
MarketEurope
Power105 hp
Engine1.5L I4, Petrol
Center bore56.1 mm
PCD5x100
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 ZR16 93W16x6.5 ET50 5x10032TiresRims
195/65 R15 91H15x6 ET45 5x10029TiresRims
195/60 R1616x6.5 ET50 5x10029TiresRims
205/50 R17 91V17x6.5 ET50 5x10032TiresRims
205/45 R18 91V18x7 ET50 5x10035TiresRims

350 1.5i

107 hp · I4 195/60 R16 5 fitments
Generation350 2012–2016
MarketLatin America
Power107 hp
EngineI4, Petrol
Center bore56.1 mm
PCD5x100
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/60 R1616x6.5 ET50 5x100–TiresRims
205/55 ZR16 93W16x6.5 ET50 5x10032TiresRims
195/65 R15 91H15x6 ET45 5x10029TiresRims
205/50 R17 91V17x6.5 ET50 5x10032TiresRims
205/45 R18 91V18x7 ET50 5x10035TiresRims

350 1.5T

128 hp · I4 205/55 ZR16 93W 4 fitments
Generation350 2012–2016
MarketAustralia
Power128 hp
EngineI4, Petrol
Center bore56.1 mm
PCD5x100
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 ZR16 93W16x6.5 ET50 5x10032TiresRims
225/50 ZR16 93W16x7 ET48 5x10032TiresRims
205/50 ZR17 91W17x7 ET48 5x10032TiresRims
225/45 ZR17 91W17x7.5 ET48 5x10035TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.