Skip to content

2023 MG 6 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2023 MG 6.

Bolt pattern

2 generations were sold in 2023. Check your chassis code before ordering wheels.

Fitment tables

3 trims sold in 2023

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

MG 6 II Facelift

2021 – 2025 2 trims

6 1.5T

178 hp · 1.5 L 15E4E I4 Petrol 1.5 L 15E4E I4 205/60 R16 3 fitments
GenerationII Facelift 2021–2025
MarketChina
Power178 hp
Engine1.5 L 15E4E I4 Petrol 1.5 L 15E4E I4, Petrol
Center bore56.1 mm
PCD5x100
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE205/60 R1616x6.5 ET50 5x100TiresRims
OE215/50 R1717x7 ET50 5x100TiresRims
Alt225/45 ZR1818x7.5 ET50 5x100TiresRims

6 1.5T PHEV

300 hp · 1.5 L 15E4E I4 Hybrid 1.5 L 15E4E I4 225/45 ZR18 3 fitments
GenerationII Facelift 2021–2025
MarketChina
Power300 hp
Engine1.5 L 15E4E I4 Hybrid 1.5 L 15E4E I4, Hybrid
Center bore56.1 mm
PCD5x100
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/45 ZR1818x7.5 ET50 5x100TiresRims
Alt215/50 R1717x7 ET50 5x100TiresRims
Alt245/40 ZR1818x8 ET50 5x100TiresRims

MG 6 II

2017 – 2024 1 trim

6 1.5T

166 hp · 1.5 L 15E4E I4 Petrol 1.5 L 15E4E I4 205/55 R16 3 fitments
GenerationII 2017–2024
MarketLatin America
Power166 hp
Engine1.5 L 15E4E I4 Petrol 1.5 L 15E4E I4, Petrol
Center bore56.1 mm
PCD5x100
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE205/55 R1616x6.5 ET50 5x100TiresRims
Alt215/50 R1717x7 ET50 5x100TiresRims
Alt225/40 ZR1818x7.5 ET43 5x100TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.