2010 MG 7 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2010 MG 7.

2010 MG 7 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2007 – 2013 2 trims

158 hp · 1.8L I4 215/55 R16 93V 5 fitments

Generation7 2007–2013

Power158 hp

Engine1.8L I4, Petrol

Center bore56.1 mm

PCD5x100

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/55 R16 93V	16x6.5 ET50 ~~5x100~~	35	Tires Rims
215/50 R17 93V	17x7 ET50 ~~5x100~~	30	Tires Rims
215/45 ZR18 91W	18x7 ET50 ~~5x100~~	33	Tires Rims
225/40 ZR19 91W	19x7.5 ET50 ~~5x100~~	33	Tires Rims
235/35 ZR20 90Z	20x8 ET47 ~~5x100~~	36	Tires Rims

181 hp · V6 215/50 R17 93V 5 fitments

Generation7 2007–2013

Power181 hp

EngineV6, Petrol

Center bore56.1 mm

PCD5x100

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/50 R17 93V	17x7 ET50 ~~5x100~~	30	Tires Rims
225/45 ZR18 91W	18x7.5 ET50 ~~5x100~~	33	Tires Rims
255/40 ZR18 91W	18x8.5 ET43 ~~5x100~~	30	Tires Rims
255/35 ZR19 90Z	19x8.5 ET43 ~~5x100~~	36	Tires Rims
255/30 ZR20 89Z	20x9 ET40 ~~5x100~~	36	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.