Skip to content

2025 MG Cyberster tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2025 MG Cyberster.

2025 MG Cyberster tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2025

Open a trim for its factory package and every alternative size, front and rear.

MG Cyberster Cyberster

2023 – 2027 2 trims

Cyberster Dual Motor

536 hp · Electric 245/45 ZR19 / 275/40 ZR19 2 fitments
GenerationCyberster 2023–2027
MarketMexico
Power536 hp
EngineElectric, Electric
Center bore57.1 mm
PCD5x112
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront245/45 ZR1919x8 ET40 5x11236TiresRims
Rear275/40 ZR1919x9.5 ET40 5x11236TiresRims
OEFront245/40 ZR2020x8.5 ET40 5x11236TiresRims
Rear275/35 ZR2020x9.5 ET40 5x11236TiresRims

Cyberster Single Motor

335 hp · Electric 245/45 ZR19 / 275/40 ZR19 2 fitments
GenerationCyberster 2023–2027
MarketLatin America
Power335 hp
EngineElectric, Electric
Center bore57.1 mm
PCD5x112
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront245/45 ZR1919x8 ET40 5x11236TiresRims
Rear275/40 ZR1919x9.5 ET40 5x11236TiresRims
AltFront245/40 ZR2020x8.5 ET40 5x11236TiresRims
Rear275/35 ZR2020x9.5 ET40 5x11236TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.