2002 MG F tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2002 MG F.

2002 MG F tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1995 – 2002 Europe market 3 trims

109 hp · 1.6L I4 185/55 R15 83V / 205/50 R15 85V 2 fitments

GenerationF 1995–2002

Power109 hp

Engine1.6L I4, Petrol

Center bore56.6 mm

PCD4x95.25

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front185/55 R15 83V	15x6 ET28 ~~4x95.25~~	28	Tires Rims
Rear205/50 R15 85V	15x6 ET28 ~~4x95.25~~	30	Tires Rims
Front185/50 R16 82V	16x6 ET28 ~~4x95.25~~	28	Tires Rims
Rear205/45 R16 84V	16x6.5 ET28 ~~4x95.25~~	30	Tires Rims

118 hp · 1.8L I4 185/55 R15 83V / 205/50 R15 85V 2 fitments

GenerationF 1995–2002

Power118 hp

Engine1.8L I4, Petrol

Center bore56.6 mm

PCD4x95.25

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front185/55 R15 83V	15x6 ET28 ~~4x95.25~~	28	Tires Rims
Rear205/50 R15 85V	15x6 ET28 ~~4x95.25~~	30	Tires Rims
Front195/45 ZR16 81W	16x7 ET28 ~~4x95.25~~	30	Tires Rims
Rear215/40 ZR16 83W	16x7 ET28 ~~4x95.25~~	33	Tires Rims

158 hp · 1.8L I4 195/45 ZR16 81W 2 fitments

GenerationF 1995–2002

Power158 hp

Engine1.8L I4, Petrol

Center bore56.6 mm

PCD4x95.25

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/45 ZR16 81W	16x7 ET28 ~~4x95.25~~	2.3	Tires Rims
205/45 ZR16 81W	16x7.5 ET32 ~~4x95.25~~	2.3	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.